Flosteer Swing check valves are ideally suitable for vertical and horizontal application. A range of Check Valves (Non-Return Valves) suitable for oil, gas, water, refining, power and chemical applications where the prevention of flow reversal is mandatory. Flosteer Check Valves are Bolted cover design up to 600# and above pressure seal design.

Stellited trims are provided for all above 600# as a manufacturing standard of “FLOSTEER” valves and in lower rating also on request. 

FLOSTEER Swing Check valves are available under any Third party inspection including IBR (Indian Boiler Regulation). Swing Check valves can be supplied with Titling disc design, Counter weight or Dash pot arrangement.

Flosteer Dual Plate, Wafer Check Valve has One Piece cast heavy stronger Body configuration provides reduced weight and size compare to a swing check valve or lift check valve. This results savings in Initial cost, space and pipe support element installation.

The Dual Plate, Wafer Check Valve employs two-spring-loaded plates hinged on a central hinge pin. When the flow decreases, the plates close by the action of torsion spring before flow reversal takes place. All features put together make the Dual Plate Check Valve as the most efficient & versatile design. It is also referred to as SILENT CHECK VALVE

It is much easier to install between standard gaskets and line flanges, and therefore is more cost effective to install and to maintain.

Its design complies with API 594 and API 6D, testing with API 598.

Flosteer Wafer Type Check Valve has short face-to-face dimensions and low weight allows a simple space saving installation between the companion flanges. The valves are suitable to mounting between weld neck or slip on type companion flanges of different standards.

They are specially developed for applications where a low-pressure loss is essential. Opening and closing of the valve will take place at an extremely low-pressure difference over the valve disc. The eccentric disc shaft combination with the disc seat guarantees a positive shut off returning media. Wafer check valves are becoming the preferred type of check valve for most applications, due to their compact design and relatively low cost.

Flosteer Lift Check Valves are available from size range 1” t 12” in Flanged End / Butt Weld End Connection, generally in all material of construction and up to 600# pressure rating.