Globe Valves
 
FLOSTEER make globe valves are meticulously designed to ensure 100% smooth flow area to reduce pressure drop across the valve. Specially designed seat and gland packing materials are provided for superheated steam and high temperature Thermic fluid to trouble free service, easy operation and longer life. Deep stuffing box is providing to assure tightness and maximum packing life. A separate properly machined and lapped back seat facilities are provided for replacement of Gland packing when valve is in stream under pressure.

FLOSTEER make globe valves are available in On-Off Disc, Control Disc and Parabolic Disc type. Stellited trims are provided for all above 600# as a manufacturing standard of “FLOSTEER” valves and in lower rating also on request. Flosteer also offer extra long, extended bonnet globe valve for low temperature and cryogenic services.

FLOSTEER Globe valves are available under any Third party inspection including IBR (Indian Boiler Regulation).

Flosteer Globe Valves are also available with Gear Box / Pneumatic Actuator / Pneumatic Cylinder / Electrical Actuator operated along with accessories like Solenoid, Limit Switch, Air Filter Regulator etc.
 
DIN Standerd Globe Vlave
DIN Standerd Globe Vlave
Globe Valve
Globe Valve
Forged Steel Globe Valve
Forged Steel Globe Valve
Globe Vlave
Globe Vlave
 
Standards:
Design Standard BS 1873/DIN
Inspection & Testing Standard BS 6755
Face To Face As Per ANSI B 16.10
End Connection Flanged End To ANSI B 16.5/BS 10 Table
Buttweld End To ANSI B 16.25
Size Range 1" To 16"
Pressure Rating 150# To 1500#
 
Pneumatic cylinde operated globe valve Spring & Diaphragm actuated operated Globa Valve Motorised Electrical Actuator Operated 3 Way Globe Valve Motorised Electrical Actuator Operated 2 Way Globe Valve
Pneumatic cylinde operated globe valve Spring & Diaphragm actuated operated Globa Valve Motorised Electrical
Actuator Operated 3 Way Globe Valve
Motorised Electrical
Actuator Operated 2 Way Globe Valve
 
Nomenclature:
Body / Bonnet ASTM A 216 GR. WCB
ASTM A 217 GR. WC1/WC6/WC9/WC11
ASTM A 351 GR. CF 8 /CF 8M/CF 3/CF 3M/CN 7M
IS 210 GR. FG 200/220/250/260
Seat AISI 410 (13% Cr.)/AISI 304/316/304L/316L/Alloy 20
Disc AISI 410 (13% Cr.)/AISI 304/316/304L/316L/Alloy 20
Disc Nut AISI 410 (13% Cr.)/AISI 304/316/304L/316L/Alloy 20
Spindle AISI 410 (13% Cr.)/AISI 304/316/304L/316L/Alloy 20
Back Sheet Bush AISI 410 (13% Cr.)/AISI 304/316/304L/316L/Alloy 20
Gland Bush AISI 410 (13% Cr.)/AISI 304/316/304L/316L/Alloy 20
Yoke Sleeve C.S./Gun Metal/EN1
Gland Flange ASTM A 216 GR. WCB/AISI 304/316/304L/316L
Gland Packing Grafoil/Graphited Asbestos/P.T.F.E. "V" Ring
Gasket CAF/Grafoil/S.S. Spiral Wound With CAF/Grafoil/P.T.F.E.
Cross Pin & Nut ASTM A 193 GR. B7/ A 194 GR. 2H/S.S. 304/316
Eye Bolt & Nut ASTM A 193 GR. B7/ A 194 GR. 2H/S.S. 304/316
Stud & Nut ASTM A 193 GR. B7/ A 194 GR. 2H/S.S. 304/316
Hand Wheel IS 210 GR. FG 200/Ductile Iron/Cast Steel
Grease Nipple Brass/S.S. 304/316
 
Knife Edge Gate Valves
Pneumatic Control Valves
Blow Down Valves
Globe Valves
Gate Valves
Check Valves
Butterfly Valves
Ball Valves
Diaphragm Valves
Flush Bottom Valves
Forged Steel Valves
Home   |   About Us   |   Products   |   Quality   |   Clients   |   Certification   |   Sitemap   |   Contact Us